MIDI and CV signals are at the heart of our synth-based setups. Controlling these instruments (especially if they are analog vintage synthesizers) might give you more than a headache though, especially if you’re trying to integrate an MPE device.
TA Programming claims to have found the cure for these headaches with their Studio MIDI And CV Interface full synthesizer control system — capable of controlling multiple synthesizers simultaneously via voltage control outputs and MIDI/USB with extra-low latency while keeping analogue instruments, vintage or otherwise, perfectly in tune with each other.
According to TA Programming CEO/CTO Tim Aviss, “We designed this interface to be not just a solution to problems that we’d encountered when controlling synthesizers in the past, but to unlock a whole new world of creativity with synthesizers from one interface.”
Watch the TA Programming interface at work in the video below:
Smart Tuning and More
Indeed, TA Programming’s debut design does just that, thanks to its innovative implementation of complimentary connections, comprising MIDI In and MIDI Out alongside USB I/O for MIDI and serial bus connectivity, together with four universal CV CONTROL outputs.
You get four universal CV CONTROL outputs that can perform any function regardless of whether it is for producing Pitch, Gate, or Aux signals. Saying that, an unlimited number of universal CV CONTROL outputs can quickly be created by daisy-chaining multiple interfaces via the MIDI ports. Also, any source — such as Pitch, Note On/Off, Velocity, Aftertouch, any MIDI CC number, signals from a DAW, and more besides — can be selected via USB or MIDI.
Fortunately the voltage of the configured output is completely user-definable between -9V and +10V, providing plenty of range to satisfy the requirements of almost all synthesizers, past and present. Put it this way: with this level of versatility, the Studio MIDI And CV Interface provides its users with complete control over note range scale — from microtonality all the way through to the limits of the connected synthesizer.
Thankfully, TA Programming’s proprietary tuning technology is capable of handling even the most stubborn scaling issues, effectively eliminating scaling and tuning issues on any analogue synthesizer, including non-linearities. This technology is built upon a six-point multi-mapping system that uses advanced interpolation and modelling algorithms all within a floating-point mathematical model before conversion to control voltages are applied in real time. In other words, once a tuning profile has been configured for the synthesizer concerned, TA Programming’s proprietary tuning technology works out the control voltages said synthesizer needs, regardless of tempco (temperature compensating) resistor variation, in order to produce pitch-perfect notes in real time — a must-have for owners of vintage or more modern analogue synthesizers alike!
Additionally, the Studio MIDI And CV Interface is MPE (MIDI Polyphonic Expression) compatible, capable of sending out full MPE via MIDI DIN or mapping single channel/polyphonic MPE out of the universal CV CONTROL outputs. As all five control dimensions are natively supported, users can be sure that their synthesizers will be as musically expressive as allowed by the MPE method.
Meanwhile, the interface itself has internal circuitry powered by USB. Ultimately, however, TA Programming pushed itself hard to ensure that the power supply can tolerate variances in input voltage so that the resulting supply is always as clean as possible, providing the highest control voltage accuracy, as well as preserving tuning and configuration regardless of the USB host.
Having said all that, TA Programming’s powerful control software allows anyone to completely configure their Studio MIDI And CV Interface. In addition to this, they can host USB MIDI controllers in the software itself, thereby bypassing their DAW, if desired. Said software also provides plentiful MIDI processing features — from LFOs to BPM-locked arpeggiators, keyboard splitting over MIDI, and much more. TA Programming plans to regularly update the interface’s firmware and control software so that its users can always access the latest features following their initial purchase.
Last, but by no means least, the Studio MIDI And CV Interface always automatically stores its user’s current configuration with no need to click save. So feel free to travel between recording studio and performance venue safe in the knowledge that their current configuration will automatically load when the interface is powered back up. Upon connection to their computer, the control software will automatically pull the current configuration from the interface itself to allow for easy editing. And as if this was not exciting enough, an unlimited number of presets and profiles for all the synthesizers in anyone’s setup can be saved to the computer and reloaded into the interface at any time.
TA Programming looks all set to play to win with its inaugural Studio MIDI And CV Interface. Owners of vintage and more modern synthesizers simply owe it to themselves and their treasured instruments to test TA Programming’s debut design. It is no ordinary MIDI-to-CV convertor, clearly!
The Studio MIDI And CV Interface is initially available for purchase — priced at £249.00 GBP — directly through TA Programming.
DISCLOSURE: Our posts may contain affiliate links, meaning when you click the links and make a purchase, we receive a commission.